Protection Circuit Module ( PCB ) for 11.1V Li-Ion Battery Pack (3 cells with 6.5A limit ) |
|
Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack - Designed for 11.1V Li-ion or Li-Polymer battery - Prevent 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 5A. Do not subject the PCB to Input voltage over 20V. Internal static charge protection circuit built into the PCB. But not subject the PCB to high static charge to avoid damage. Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.
Protection Circuit Module ( PCB ) for 11.1V Li-Ion Battery Pack (3 cells with 6.5A limit )
|
Protection Circuit Module ( PCB ) for 14.8V Li-Ion Battery Pack (4 cells with 6.5A limit ) |
|
Protection Circuit Board for 14.4V Li-ion and Li-polymer battery pack - Designed for 14.4V Li-ion or Li-Polymer battery - Prevent 14.4V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 5A. Please use the compatible charger for your battery pack. Special attention to your Input and output voltage, current to avoid PCB damage - When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled - Internal static charge protection circuit built into the PCB. But not subject the PCB to high static charge to avoid damage.
Protection Circuit Module ( PCB ) for 14.8V Li-Ion Battery Pack (4 cells with 6.5A limit )
|
Protection Circuit Module ( PCB ) for 18.5V Li-Ion Battery Pack (5 cells with 8A limit ) |
|
Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit board is specially designed for 18.5v Li-Ion Battery packs made of Li-ion and Li-Polymer cells. Keep 18.5V Li-Ion Battery packs from overcharge and over discharge - Limit the Max discharge Current to 8.0 A.
Protection Circuit Module ( PCB ) for 18.5V Li-Ion Battery Pack (5 cells with 8A limit )
|
Protection Circuit Module ( PCB ) for 22.2V Li-Ion Battery Pack (6 cells with 8A limit ) |
|
Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit is specially designed for 22.2V Li-Ion Battery packs made of Li-ion and Li-Polymer cells. Keep 22.2V Li-Ion Batery pack from overcharge and overdischarge.
Protection Circuit Module ( PCB ) for 22.2V Li-Ion Battery Pack (6 cells with 8A limit )
|
Protection Circuit Module ( PCB ) for 29.6V Li-Ion/Li-Polymer Battery Pack (8 cells with 10A limit ) |
|
Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 29.6V 8 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells. Keep 29.6V Li-Ion Battery pack from overcharge and over discharge - Keep 29.6V Li-Ion Battery pack 's discharging current lower than 10 A.
Protection Circuit Module ( PCB ) for 29.6V Li-Ion/Li-Polymer Battery Pack (8 cells with 10A limit )
|
Protection Circuit Module ( PCB ) for 3.6V Li-Polymer Battery (3.5A limit) |
|
Protection Circuit Board for 3.6V Li-ion and Li-polymer battery pack. Designed for 3.6V Li-ion or Li-Polymer battery. Prevent 3.6V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 3.5A. Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.
Protection Circuit Module ( PCB ) for 3.6V Li-Polymer Battery (3.5A limit)
|
Protection Circuit Module ( PCB ) for 3.6V Li-Polymer Battery (3.5A limit) |
|
Protection Circuit Board for 3.6V Li-ion and Li-polymer battery pack - Designed for 3.6V Li-ion or Li-Polymer battery - Prevent 3.6V Li-ion or Li-polymer battery from over-charging, over-discharging and from discharging current more than 3.5A. Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discahrging.
Protection Circuit Module ( PCB ) for 3.6V Li-Polymer Battery (3.5A limit)
|
Protection Circuit Module ( PCB ) for 37V Li-Ion/Li-Polymer Battery Pack (10 cells with 27A limit ) |
|
Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 37 V Li-Ion Battery packs made of Li-ion and Li-Polymer cells.
Protection Circuit Module ( PCB ) for 37V Li-Ion/Li-Polymer Battery Pack (10 cells with 27A limit )
|
