Battery Store - Protection Circuit Module ( PCB ) for 18.5V Li-Ion Battery Pack (5 cells with 8A limit ) - Protective PCB for Lion Battery Packs

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit board is specially designed for 18.5v Li-Ion Battery packs made of Li-ion and Li-Polymer cells.
Keep 18.5V Li-Ion Battery packs from overcharge and over discharge
Limit the Max discharge Current to 8.0 A.
Designed for 5 Cells?€?Li-ion /Li-polymer Battery Packs
Li-ion/Polymer Battery Protection
SEIKO S8233 Protection IC
IR IRF4906, FDS9926 MOSFET
Dimension: 3.55 inches x 0.8 inch

PCB Indications
B+ Battery (+)
B- Battery (-)
P+ OUT (+) /Load (+)
C+ OUT (+) /Charge (+)
P- OUT (-) /Charge(-) / Load(-)

Electric performance
Overcharge Protection voltage for single cell:4.235V +/- 0.025V
Over discharge Protection voltage for single cell:2.30V+/-0.08V
Over current detection Protection:<=8 A +/-1A
Supply current:MAX 600uA
Short circuit Protection
0 V charge
Protection circuit Resistance: <=10 mill-oHms