Battery Store - Protection Circuit Module ( PCB ) for 22.2V Li-Ion Battery Pack (6 cells with 8A limit ) - Protective PCB for Lion Battery Packs

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery from over charge, over discharge and prevent accidental battery explosion due to its extra high energy density. This protection circuit is specially designed for 22.2V Li-Ion Battery packs made of Li-ion and Li-Polymer cells.
Keep 22.2V Li-Ion Batery pack from overcharge and overdischarge
Limite the Max Cuurent to 8.0 A.
Designed for 6 Cells Li-ion /Li-polymer Battery Packs
Battery Protection
Adopt SEIKO S8233 Protection IC
Adopt IR IRF4906, FDS9926 MOSFET
Dimension: 2.6 inches x 1.7 inches

PCB Indications
B+ Battery (+)
B- Battery (-)
P+ OUT (+) /Load (+)
C+ OUT (+) /Charge (+)
P- OUT (-) /Charge(-) / Load(-)

Electric performance
Overcharge Protection voltage for single cell: 4.235V+/-0.025V
Over discharge Protection voltage for single cell: 2.30V+/-0.08V
Over current detection Protection <=8A+/- 1A
Supply current: MAX 600uA
Short circuit Protection
0 V charge
Protection circuitry Resistance: <= 10 milli-ohms