Battery Store - Protection Circuit Module ( PCB ) for 29.6V Li-Ion/Li-Polymer Battery Pack (8 cells with 10A limit ) - Protective PCB for Lion Battery Packs

Specifications:

Easy Connection:

Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 29.6V 8 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells.
Keep 29.6V Li-Ion Battery pack from overcharge and over discharge
Keep 29.6V Li-Ion Battery pack 's discharging current lower than 10 A
Short Cut Protection
8 Cells Li-ion / Li-polymer Battery Pack ( 29.6V up to 20 Ah)
Battery Protection
Dimension: 2.87 inches x 1.69 inches

PCB Indications
B+ Battery (+)
B- Battery (-)
P+ OUT (+) /Load (+)
C+ OUT (+) /Charge (+)
P- OUT (-) /Charge(-) / Load(-)

Electric performance
Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
Overdischarge Protection voltage for single cell: 2.30V +/-0.08V
Overcurrent detection Protection <= 10 A +/-1A
Supply current: MAX 600uA
Short circuit Protection
0 V charge
Protection circuitry Resistance: <= 10 mohms